SHOW(OPCS)		Optical Printer Control System		SHOW(OPCS)

    NAME
	show - show positions for all 8 motors

    USAGE
	show [-all] [-d]

    DESCRIPTION
	Shows the current position counters for all motors. Shutter motors 
	(ABC) will show positions in 'frames'.

	Interpolation channels (such as the fader) will show positions in
	actual step positions, NOT interpolation positions.

	The -all flag shows all information about each motor.

	The -d is a special internal debugging flag that should
	not be used in production, and is for developer's use only.

    EXAMPLES
        >show
	A=0                   I=0
	B=0                   J=0
	C=0                   K=0
	D=0                   L=0
	E=0                   M=0
	F=0                   N=0
	G=0                   O=0
	H=0                   P=0

	>show -all
	      A CHANNEL                        B CHANNEL        
	     Name: Aerial                    Name: Main
	  Counter: 0                      Counter: 0
	      PPR: 2000                       PPR: 2000
	      Mrp: 500                        Mrp: 500
	 NormRamp: 3,120                 NormRamp: 3,120
	 SlewRamp: 3,120                 SlewRamp: 3,120
	 ActSpeed: 0.25                  ActSpeed: 0.25
	NormSpeed: 0.25                 NormSpeed: 0.25
	SlewSpeed: 0.18                 SlewSpeed: 0.18
	      Fpf: 16                         Fpf: 16
	     Slop: 0                         Slop: 0

	      C CHANNEL                        D CHANNEL        
	     Name: Camera                    Name: Fader
	  Counter: 0                      Counter: 0
	      PPR: 2000                       PPR: 2000
	      Mrp: 500                        Mrp: 1000

        ..snipped.. 

    BUGS
	None.

    SEE ALSO
	GO(OPCS)              - move motor channels to new step positions
	BIGCOUNTERS(OPCSDEFS) - changes on-screen counter display

    ORIGIN
	Gregory Ercolano, Los Feliz California  09/04/90